SLIDING SLEEVE SWITCH TOOL
INTRODUCTION
The sliding sleeve switch tool is inserted into the positioning groove of the sliding sleeve through a shrinkable positioning clamp, and is moved by up and down impact. Sleeve sleeve to open or close the sleeve. The inside of the positioning block is equipped with a spring, so that the switch tool is in an open state, During the compression process, the spring can be compressed to reduce the outer diameter of the switch tool. Positioning groove of sleeve. After opening or closing the sliding sleeve, continue to lift or lower the short cutting nails, the positioning block retracts, and the positioning card slot The switch tool can be smoothly passed through the sliding sleeve to remove the switch tool.
FEATURES
Able to verify whether the sliding sleeve is fully opened or closed. After the opening or closing operation is completed, try to move up and down again. Because the displacement profile cannot be locked, it indicates that the switch operation is completed with the emergency shear release function. In an emergency, you can cut the automatic release movement Bit block, release the switch tool to open or close the slide sleeve in one trip.
Note: Other specification products are available.